Flexible joint with split shaft coupling
A shaft coupling is intended to connect two split shafts as a perfect joint. By using flexible shaft couplings in industrial installations, you can save a lot of time and money. In addition, the flexibility contributes to reduced vibrations. The couplings are easy to assemble and the rubber elements have high wear resistance.
Une
UNEFLEX Series-M, Series-1 and DVA-Series
Flexible shaft coupling. can be delivered pre-drilled, finished drilling and with keyway design. The smallest Uneflex model has a maximum diameter of Ø25 and up to Ø180 with a nominal torque of 13,500 Nm.
- UNEFLEX M series patented by UNE
- Series 1 is interchangeable with the Stromag Periflex PNA series
- The DVA series is interchangeable with the Stromag Periflex PNA series
UNEFLEX T-Series, DVS-Series and F-Series
Uneflex med konisk klämkoppling är en mer mångsidig koppling med enkel installation. Möjligheten att byta ut den konisk klämkopplingen gör det möjligt att använda samma koppling till flera axeldimensioner. Den koniska klämkopplingen kan monteras på två olika sätt, eftersom den monteras från yttre sidan (H-utförande) eller internt (F-utförande).
- The T series patented by UNE
- F series interchangeable with Fenner, Fenaflex, Pneumobloc, Martinflex and Challenge
- DVS series with conical bushing interchangeable with Stromag Periflex PNS series
UNEFLEX SD Series
The coupling has an axial extension and is suitable for installations where you have a larger axle distance. This coupling is suitable for pump installations, by removing the shaft extension it is possible to remove the coupling and do the necessary maintenance work. The simplicity reduces maintenance costs for pumps, compressors and many other applications.
UNEFLEX D-Series
Flexible coupling with brake disc, often used in crane applications. This coupling can be supplied with a vented disc or a solid disc. The ventilated disc prevents the disc from overheating. This flexible coupling can be supplied with pre-drilled or finished hole design. Different disc dimensions are available depending on the coupling reference and the required torque. Torque capacity from 400 Nm to 2,500 Nm.
UNEFLEX P-Series
Flexibel koppling med trumbroms som oftast används i kranapplikationer, dubbla bromsar enligt DIN 15435 är standard för vissa kvarnar.
One of the advantages of the coupling that has a drum brake is that it can be mounted vertically. Which means that you can change the flexible "tyre" in the coupling without dismantling the gearbox or engine.
Uneflex with drum brake is equipped with fall protection to prevent the load from falling to the ground if the elastic rubber element "tyre" breaks.
UNEFLEX FF Series
The coupling has a nominal capacity from 20 Nm to 600 Nm and can handle large axial displacements. The FF series can handle up to 8.0 mm axial displacement as well as 2.0 mm radial and 2° angular deviation. The coupling can be delivered pre-drilled or with finished drilling, max shaft diameter Ø75 H7.
ACOFLEX AD Series
- With disc brake
- Torque Range: 400Nm – 12500 Nm.
- Shaft diameters: 432mm.
- Interchangeable coupling element.
ACOFLEX A-Series Axle to Axle - Spindle coupling
- Easy assembly.
- Torque range: 6.5Nm – 25000Nm.
- Shaft diameters: up to 210 mm.
- Interchangeable with international manufacturers.
ACOFLEX AT-Series
- Easy assembly.
- Torque range: 50Nm – 4000Nm.
- Shaft diameters: up to 110 mm.
- Interchangeable coupling element.
ACOFLEX AS Series
- Extended hub distance
- Torque range: 50Nm – 4000Nm.
- Max. length: 308mm.
- Interchangeable coupling element.
ACOFLEX AP Series
- With Drum Brake
- Torque range: 400Nm – 25000Nm.
- Shaft diameters: up to 710 mm.
- Interchangeable coupling element.
LAMAFLEX Disc coupling - KL & KLS Series
- Interchangeable with international manufacturers.
- Torsion stiff.
- Torque range: 15Nm – 12000Nm.
- Max. length: 297mm, With 2 Disks (KLS series): 520mm
LAMAFLEX FLS Series
- Interchangeable with international manufacturers.
- Torsion stiff.
- Torque range: 170Nm – 18000Nm.
- Max. length: 566mm.
Paulstra
Axoflex
A coupling with separate rubber elements that can be easily replaced without disassembling the entire coupling. Axoflex can handle large axial movements. Torque range 600Nm - 35,000 Nm
Cardaflex
A compact coupling in two different designs, one with a solid core and one with a center hole. The coupling has relatively high flexibility except radially and is well suited for high rotational speeds. Torque range 30Nm - 1800 Nm
Juboflex
Very flexible connection in all directions. The rubber element can be mounted without changing the machine installation. Torque range 40-1200 Nm.
Juboflex ”S”
Very flexible connection in all directions. The rubber element can be mounted without changing the machine installation. Juboflex "S" has a higher load capacity than standard Juboflex. Torque range 60-1800 Nm.
Miniflex
Small radial coupling with large radial and axial flexibility, torque range up to 60Nm.
MPP
Compact radial coupling with easy mounting, does not support axial flexibility. Torque range 30-650 Nm.
Radiaflex RTP
A relatively rigid coupling that has a very progressive flexibility curve depending on load. Radiaflex RTP is designed so that the rubber elements can be replaced without disassembling the coupling. Torque range 470Nm - 52,000 Nm
Straflex
Compact coupling with little flexibility intended for high rotational speeds. The rubber element can be mounted without changing the machine installation. Torque range 50-6000 Nm.
